Admin - add transmitting device: Porovnání verzí

Z Freenetis Wiki
Přejít na: navigace, hledání
 
Řádek 9: Řádek 9:
 
2) Select the device type AP and select the appropriate template
 
2) Select the device type AP and select the appropriate template
  
[[Soubor:adddevice.png]]
+
[[Soubor:A-novezarizeni.PNG]]
 
 
  
 
3) If the template does not exist, click the green cross to add a template. Give it a proper name and set the interface by type
 
3) If the template does not exist, click the green cross to add a template. Give it a proper name and set the interface by type

Aktuální verze z 10. 12. 2013, 11:03


New device in AP mode is inserted as well as client devices are required appropriate permissions. Click on the Devices menu - here you can check whether the device no longer exists - use a filter.

1) If not, click on 'Add new device'

2) Select the device type AP and select the appropriate template

A-novezarizeni.PNG

3) If the template does not exist, click the green cross to add a template. Give it a proper name and set the interface by type

A-noveasablona.PNG


4) You will return again to edit the new device

A-novezarizenizesablony.PNG


5) Set a correct name to equipment, use the new template and save. Then a second part of the table where you fill MAC addresses and IP addresses of interfaces.

A-novezarizeniirozhrani.PNG

6) Save

Devices will be without detailed information after saving.

7) Click on the toothed wheel and add interface details, such as more accurate description

A-detailrozhrani.PNG


8) Click on the toothed wheel and add details in order to connect to any device

A-novezarizenilinka.PNG

After completing and saving you will get a complete record of equipment

A-novezarizeniulozeno.PNG A-novezarizeniulozeno2.PNG