Zobrazení zdroje stránky Admin - add transmitting device

[[cs: Admin - přidat vysílací zařízení]]
[[ru: Админ - добавить передающее устройство]]

New device in AP mode is inserted as well as client devices are required appropriate permissions.
Click on the Devices menu - here you can check whether the device no longer exists - use a filter.

1) If not, click on'' 'Add new device'''

2) Select the device type AP and select the appropriate template

[[Soubor:Adddavice.png]]


3) If the template does not exist, click the green cross to add a template. Give it a proper name and set the interface by type

[[Soubor:A-noveasablona.PNG]]


4) You will return again to edit the new device

[[Soubor:A-novezarizenizesablony.PNG]]


5) Set a correct name to equipment, use the new template and save. Then a second part of the table where you fill MAC addresses and IP addresses of interfaces.

[[Soubor:A-novezarizeniirozhrani.PNG]]

6) Save

Devices will be without detailed information after saving.

7) Click on the toothed wheel and add  interface details, such as more accurate description

[[Soubor:A-detailrozhrani.PNG]]


8) Click on the toothed wheel and add details in order to connect to any device

[[Soubor:A-novezarizenilinka.PNG]]

After completing and saving you will get a complete record of equipment

[[Soubor:A-novezarizeniulozeno.PNG]]
[[Soubor:A-novezarizeniulozeno2.PNG]]