Management switch

Switches have internal network interface connected to any micro-controller that implements configuration management switches = switching logic ( switching fabric ) , web / telnet / ssh interface , etc.

The internal interface is connected to the switching fabric as well as other switch ports :

[ [File : freenetis - manageswitch.png ] ]

Most switches can managed on the internal interface to form any number of VLAN interfaces to allow switch management access to any VLAN that you create in the switch .

So manageable switch in FreenetIS be enrolled as a device that has an internal 1 ( = not at rear) LAN interface and need 24 ports . If the LAN interface is hidden, then there may not record segment, flag FreenetIS is not set - at the moment it is necessary to create even the hidden segment , in the figure this is the arrow "LAN interface" and "Internal Port".

Quimi procedure is proposed :

Or they could create a segment Interconnection Internal port - LAN Management . Then add the device port Inerní port and LAN Management interface that actually connect this segment. Above Management LAN interface then we create individual VLAN interfaces (belonging to a VLAN) - to them then we will assign IP addresses managovací .