Sivosha v 6. 8. 2013, 13:03

2013-08-06T13:03:07Z

Sivosha v 6. 8. 2013, 13:00

2013-08-06T13:00:50Z

Quimi: Založena nová stránka: cs:DHCP

2013-05-21T12:07:28Z

Založena nová stránka: cs:DHCP

Nová stránka

[[cs:DHCP]]

@@ Řádek 1: / Řádek 1: @@
 [[cs:DHCP]]
-[[ru:DHCP]]
+[[ru:DHCP протокол]]
 From version 1.1 FreenetIS is able to manage DHCP servers on devices which are running on Linux and RouterOS. Management is based on the same principle as [[přesměrování]] (redirect) or [[zajištění kvality služeb (QoS)]] (Quality of Service (QoS)) and a device with a DHCP server downloads your FreenetIS data configuration and  applies them to themself. For installation, you must perform the following steps in FreenetISu and DHCP servers.

← Starší verze		Verze z 6. 8. 2013, 13:00
Řádek 1:		Řádek 1:
	[[cs:DHCP]]		[[cs:DHCP]]
		+	[[ru:DHCP]]
		+
		+	From version 1.1 FreenetIS is able to manage DHCP servers on devices which are running on Linux and RouterOS. Management is based on the same principle as [[přesměrování]] (redirect) or [[zajištění kvality služeb (QoS)]] (Quality of Service (QoS)) and a device with a DHCP server downloads your FreenetIS data configuration and applies them to themself. For installation, you must perform the following steps in FreenetISu and DHCP servers.
		+
		+	==Settings on FreenerIS page==
		+	We suppose that your FreenetIS contains a description of your network (subnet, IP address).
		+
		+	# In tab System set in the Settings section an address of your DNS server.
		+	#In subnets, which are managed by DHCP server, set the DHCP to "yes".
		+	#Every such subnet must have one gateway (represented by IP address) and and the IP address must be connected to device that represents the DHCP server (so that one of its interfaces must contain the IP address). …..
		+	# Now set all the physical devices according to the instructions below
		+	# In the menu you can find the item'' 'DHCP servers", where you can see the last time your DHCP server downloaded its configuration from FreenetIS. Last update time is used to distinguish whether the DHCP server is active. Boundaries of activities can be set as the duration in seconds. This setting is available in the Settings tab in the System. The number of inactive DHCP server is displayed as an indicator in the menu.
		+
		+	Warning:
		+
		+	*It is necessary for every IP address in the subnets which were maneged by DHCP server to ba assigned to the interface with a valid MAC address.
		+	* Any errors in the configuration and during communication a DHCP server with FreenetIS are shown in the section'' 'errors and logs'''.
		+
		+	==Setting up a DHCP server==
		+
		+	On the DHCP server, you must use a script that downloads the configuration of FrinetIS and set it to DHCP. You can set how often you want to perform the action (the default is 5 minutes), and the configuration is loaded only when it was changed (optimise).
		+
		+	=== Linux (debian) ===
		+
		+	1)Install the package'' 'freenetis-dhcp''' (from FreenetIS repository).
		+	During installation you will be asked to enter your'' 'URL to your FreenetISu''','' 'ID device''' (ID device from FreenetIS, which represents the DHCP server that you set) and'' 'timeout''' in seconds to load the configuration from FreenetIS.
		+	apt-get install freenetis-dhcp
		+
		+	2)Start the daemon (when you will start the it next time, operating system will start automatically)
		+	/etc/init.d/freenetis-dhcp start
		+
		+	If you can see:
		+	Starting FreenetIS DHCP daemon: OK
		+
		+	Everything installed fine and your FreenetIS should be in the list of DHCP servers update'' 'access time''' in the device.
		+
		+	If any other string was printed it means an error has occurred. The details can be found here:
		+	less /var/log/freenetis-dhcp.log
		+
		+	3) If you want to add to the DHCP configuration to the setting that is independent of FreeneetIS, put it in the file'' / etc / dhcp / dhcpd.conf.custom''.
		+
		+	=== Router OS (mikrotik) ===
		+
		+	On your Mikrotik router create a new script'' 'freenetis-dhcp-sync.rsc''' and copy the contents into it content of the same file from'' application / vendors / dhcp''.It is then necessary to modify the following variables by script:
		+
		+	'' 'PATHFN''' - URL of your installation FreenetIS
		+
		+	'' 'DeviceID''' - Device ID Mikrotik router in your FreenetIS
		+
		+
		+	For regular startup script you should add an entry to the schedule (instead of 5 minutes, you can use your interval):
		+
		+	/system scheduler add disabled=no interval=5m name=freenetis-dhcp-sync on-event=freenetis-dhcp-sync.rsc
		+
		+
		+
		+	==FreenetIS configuration - practice ==
		+
		+	to be continued
		+
		+	==To complete commissioning should be done: ==
		+
		+	1) Install package'' 'freenetis-DHCP''' on the appropriate machine, wgich has to be DHCP Server.
		+	2)check whether the on the machine '' / etc / freenetis / freenetis-dhcp.conf'' in line'' DEVICE_ID = "4808"'' was set with correct number, which is DHCP devoce in FreenetIS.
		+	3)start DHCP daemon
		+	root@freenetis1:# /etc/init.d/freenetis-dhcp start
		+	Starting FreenetIS DHCP deamon: OK
		+
		+	4)Then we can check the status and view log
		+	root@freenetis1:# /etc/init.d/freenetis-dhcp status
		+	Freenetis DHCP is running with PID 15768
		+	root@freenetis1:# tail -f /var/log/freenetis-dhcp.log
		+	[INFO] Fri, 25 Jan 2013 19:29:56 +0100 Downloading ISC DHCP SERVER config from (http://fis.pvfree.net/freenetis)
		+	[INFO] Fri, 25 Jan 2013 19:29:57 +0100 No change -> keeping old configuration
		+
		+	The last line is the message means that the script have not find changes compared to the previous configuration and therefore did not download or restart the daemon.
		+
		+	==To complete functionality==
		+
		+	1)The machine that is running the DHCP daemon can have multiple interfaces and multiple IP addresses. It has to have specified minimum (an address) in FreenetIs, which will be connected to FreenetIS server.
		+
		+	2) Each address rang, which has to have functional DHCP, should be defined as "Subnet"
		+
		+	3)After it was defined by the following subnet, it will have enabled flag'' 'DHCP-YES'''.
		+
		+	4) You have to defined the interface (eth0, wlan1, ath2, vlan0135 ...) on the machine that runs DHCP server. And
		+	5) assigned 'IP address' to the interface. And
		+	6) the addresses are indicated as'' 'Gate'''!
		+
		+	==Errors==
		+	If an error occurs in FreenetIS ''Device has not been Exported: Bad MAC address format'', one of the reasons might be that it is using a duplicated MAC in the same subnet.
		+	root@freenetis1:~# tail -n 30 /var/log/freenetis-dhcp.log
		+	[INFO] Fri, 25 Jan 2013 07:29:56 +0100 Downloading ISC DHCP SERVER config from (http://10.10.10.10/freenetis)
		+	[ERROR] Fri, 25 Jan 2013 07:29:56 +0100 '''Download failed (code: 403)'''
		+	[INFO] Fri, 25 Jan 2013 07:34:56 +0100 Downloading ISC DHCP SERVER config from (http://10.10.10.10/freenetis)
		+	[ERROR] Fri, 25 Jan 2013 07:34:56 +0100 '''Download failed (code: 403)'''
		+
		+	then enter the address, which Linux server uses to connect to the server FreenetIS, to the list of 'IP addresses' on the DHCP server

DHCP (english) - Historie editací

Sivosha v 6. 8. 2013, 13:03

Sivosha v 6. 8. 2013, 13:00

Quimi: Založena nová stránka: cs:DHCP